CT-103 Dry Film Lubricant | MIL-PRF-46010 AS5272 Type III
Category: Dry Film Lubricant
Description
CT-103 is a Dry Film Lubricant coating with lubricating solids. CT-103 provides solid lubrication of parts subject to torque or contact stresses. It is not affected by dust or dirt. This is to be used in combination with oil, grease or paste. It provides intermittent dry lubrication properties.
Substrate(s)
- Aluminum
- Lead
- Stainless Steel
- Steel
- Tin
Thickness
- Thickness (mil): 0.2 - 0.4
Color(s)
- Gray
Process
CT-103 Dry Film Lubricant coating is applied as a spray process. Different surface preparatory methods appropriate for the substrates are used prior to the coating process. Coating thickness is varied to suit the application. Typical coating thickness varies from 0.2 - 0.5 mil up to three coats. Coating consists of phenolic resins with MoS2.
Advantages
Not affected by dust or dirt, Low friction, Provides intermittent dry lubrication, Excellent load carrying capacity, Thin coating to accommodate assembly constraints. CT-103 meets MIL-PRF-46010 AS5272 Type III.
- Corrosion Protection
- Increased Lubricity
- Low Coefficient of Friction
- Oil and Fuel Resistant